Pins

Most Recent Pins (195)

Paul Laurentiu
Technicians replaced a failed compressor on a Carrier AC unit in Austin, Texas. The system had stopped cooling and made loud startup noises. The team removed the damaged compressor, installed a new one, completed brazing, electrical repairs, and refrigerant recharging. Testing confirmed restored performance and improved cooling efficiency.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed a thermostat repair in Lakeway, Texas. The service corrected wiring and control issues that disrupted accurate temperature regulation and AC startup. Technicians restored full thermostat function to support consistent heating and cooling. This HVAC repair helps prevent short cycling and reduces stress on the AC system.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed an AC refrigerant recharge on an Amana unit in Austin, Texas. The technician diagnosed low refrigerant levels and added 1.5 pounds of R-410A. The service restored cooling, improved airflow, and reduced compressor strain, helping the system operate efficiently in Austin's 78732 area.
Check-in Location
Paul Laurentiu
A technician in Austin, Texas replaced a failed 2-ton evaporator coil on a Goodman AC unit. The team removed the damaged coil, completed welding connections, pressure tested the system with nitrogen, and added 5 pounds of R-410A refrigerant. This HVAC repair restored cooling and improved system performance.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a failed heating element and high limit thermostat in a Samsung dryer. The repair resolved issues with poor heat output and damp clothes after cycles. This service restored proper temperature control and ensured reliable dryer operation.
Check-in Location
Paul Laurentiu
A technician replaced a faulty defrost control board on a Whirlpool refrigerator in Round Rock, Texas. The service resolved frost buildup, uneven cooling, and poor airflow. This repair restored normal defrost cycles and stabilized freezer temperatures to prevent future cooling problems and strain on the compressor.
Check-in Location
Paul Laurentiu
A technician replaced a failed main control board on an LG dryer in Austin, Texas. The dryer showed no power and failed to complete drying cycles. Accurate diagnostics identified the faulty board, which was removed and replaced. The repair restored full function, power, and normal cycle performance for the appliance.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a failed evaporator fan motor in a Whirlpool refrigerator. The repair restored airflow and temperature control, preventing further issues like frost buildup and compressor strain. This service addressed symptoms such as weak cooling and unusual fridge noises.
Check-in Location
Paul Laurentiu
A technician installed a hard start kit on a KitchenAid refrigerator in Austin, Texas. The repair addressed delayed startup and compressor strain, helping restore cooling performance. This service can reduce electrical stress and extend appliance lifespan. The job occurred in the 78749 area of Austin, supporting local homeowners with reliable refrigerator repairs.
Check-in Location
Paul Laurentiu
Technicians recharged a Carrier air conditioning system with 2.5 pounds of refrigerant in Leander, Texas. This AC service restored correct operating pressure and improved cooling efficiency. The team verified system performance and ensured consistent cold air. Refrigerant recharging helps prevent poor cooling and increased energy use during hot weather.
Check-in Location
Paul Laurentiu
A technician added 2 pounds of Freon 407C to an American Standard air conditioner in Austin, Texas. The repair corrected low refrigerant levels, restored proper cooling, and improved system performance. The technician completed a full diagnostic and recharged the unit based on manufacturer guidelines to help prevent compressor strain and uneven airflow.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty bottom heating element in a double wall oven in Austin, Texas. The repair involved safely removing the oven from the wall and restoring proper baking function. This service ensured even heating and prevented further electrical problems in the home's kitchen appliance.
Check-in Location
Paul Laurentiu
A technician replaced a failed heating element in a Samsung dryer in Austin, Texas. The dryer had stopped producing heat during normal cycles. This dryer repair restored proper temperature control and improved drying performance. The service included thermal diagnostics and electric component replacement to ensure safe and efficient operation.
Check-in Location
Paul Laurentiu
A technician repaired an LG oven in Lakeway, Texas, after a fan motor failure caused the control panel to lose power. The repair involved replacing thermal fuses and restoring the cooling system to prevent future overheating and electrical damage. This service ensured safe operation and extended the oven’s functional lifespan.
Check-in Location
Paul Laurentiu
A technician replaced a failed contactor on a Carrier air conditioning unit in the Travisso subdivision of Leander, Texas. This repair restored system function and protected internal components. The service addressed startup failure during high-demand use, helping prevent further HVAC issues. Local homeowners rely on expert electrical diagnostics and AC system repairs.
Check-in Location
Paul Laurentiu
A technician replaced a failed electric oven bake element in South Austin, Texas. The repair restored proper heating and ensured consistent temperature performance. This service improved the oven’s functionality and supported safe electrical operation. The job addressed issues with uneven baking and heating failure in a residential kitchen appliance.
Check-in Location
Paul Laurentiu
A licensed HVAC technician added three pounds of refrigerant to an AC unit in South Austin, Texas. The service corrected low refrigerant levels that were causing poor airflow and warm air. This AC recharge restored cooling performance and improved system efficiency, helping prevent further strain on the unit.
Check-in Location
Paul Laurentiu
A technician repaired a GE bottom freezer refrigerator in Georgetown, TX by replacing the failed evaporator fan motor. This repair restored consistent airflow between the freezer and refrigerator sections, solving issues with uneven cooling and warm temperatures. The service improved overall refrigerator performance by fixing the internal fan system.
Check-in Location
Paul Laurentiu
A technician replaced the master switch power supply on a KitchenAid built-in wall refrigerator in Austin, Texas. This repair resolved intermittent shutdowns and restored normal cooling. The service corrected voltage issues and ensured stable operation. The work focused on precise diagnostics and accurate component replacement for reliable refrigerator performance.
Check-in Location
Paul Laurentiu
A technician replaced a failed capacitor and installed a hard start kit on an air conditioning compressor in Austin, TX. This repair improved startup reliability and reduced compressor strain, restoring efficient cooling. The service addressed issues related to hard starts and breaker trips caused by electrical load.
Check-in Location
Paul Laurentiu
A technician replaced the main control board on an LG dryer in Leander, Texas. The repair fixed power and cycle issues, restoring safe electrical function. This LG dryer repair improved reliability and resolved error codes. Patriot Appliance and Air Conditioning Repair completed the service in Leander, TX.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty AC capacitor in Leander, Texas. The repair resolved issues with the unit failing to start, shutting down, and blowing warm air. The service improved system performance by restoring compressor and fan motor function. Proper capacitor installation is essential for reliable air conditioning and overall HVAC efficiency.
Check-in Location
Paul Laurentiu
Technicians added two pounds of Freon to an air conditioning unit in Austin, TX to restore cooling and improve system efficiency. They diagnosed low refrigerant levels and completed a safe recharge following manufacturer specifications. This AC repair service helped resolve weak airflow and warm air issues caused by low Freon.
Check-in Location
Paul Laurentiu
Technicians added two pounds of Freon to an AC unit in Austin, TX 78749 to restore cooling and improve system efficiency. The team identified low refrigerant levels and completed a safe recharge to meet manufacturer standards. This AC repair service helps prevent weak airflow, warm air, and increased energy costs in residential systems.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty Whirlpool icemaker water inlet valve in Georgetown, TX. The repair addressed water leaks and inconsistent ice production. The service involved diagnosing water flow issues and installing a manufacturer-approved part to restore refrigerator function. This appliance repair in Georgetown ensured reliable ice making and proper water pressure.
Check-in Location
Paul Laurentiu
A technician added 1.5 pounds of R-407C refrigerant to an AC unit in Cedar Park, Texas. This service restored correct system pressure and improved cooling efficiency. Accurate refrigerant charging helps prevent compressor damage and supports proper air conditioner operation. This residential AC repair ensured the unit met manufacturer specifications.
Check-in Location
Paul Laurentiu
Technicians replaced a dual capacitor in a residential HVAC system in Austin, TX. The service restored proper cooling and electrical function. They tested the compressor and condenser fan motor to ensure safe operation and helped prevent system failure due to startup issues or overheating.
Check-in Location
Paul Laurentiu
Technicians replaced a dual capacitor on an Amana HVAC system in Leander, Texas. The repair restored cooling performance and resolved startup issues. They checked the compressor and fan motor for proper operation. This service helped maintain efficiency and prevent electrical damage in the system.
Check-in Location
Paul Laurentiu
Technicians replaced a 14 HP condenser fan motor in Austin, Texas. The failed 800 RPM motor was removed and a 25 RPM model was installed. This repair restored airflow, protected the compressor, and improved cooling efficiency. The service addressed overheating risks caused by poor heat dissipation in the outdoor air conditioning unit.
Check-in Location
Paul Laurentiu
Technicians replaced a worn drum roller kit in an LG dryer in Austin, Texas. The repair resolved noise and vibration issues and restored normal drying performance. This service improves appliance function and prevents additional wear. Technicians inspected all components to ensure reliable operation and extended the dryer's service life.
Check-in Location
Paul Laurentiu
Technicians replaced a hard start kit on a Sub-Zero refrigerator in Austin, Texas. This service improved compressor startup, reduced electrical strain, and helped prevent early failure. The repair used manufacturer-approved parts and supported continued performance in a high-end built-in model.
Check-in Location
Paul Laurentiu
Technicians replaced a failed emitter ice maker control board on a KitchenAid built-in wall refrigerator in Austin, Texas. The service restored sensor communication and ice production. Repair involved diagnostic testing and installation of approved components for long-term function. This type of refrigerator repair supports high-end units commonly used in homes across nearby areas like Leander, Texas.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty ice maker control board in a built-in KitchenAid refrigerator in Austin, TX. The repair restored consistent ice production and resolved electrical issues affecting ice cycles. The service used manufacturer-compatible parts for reliability. This refrigerator repair focused on accurate diagnostics and clean execution for high-end kitchen appliances.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty evaporator fan motor in a Whirlpool refrigerator for a homeowner in Austin, Texas. This repair restored airflow and fixed temperature issues in both fresh food and freezer sections, improving overall performance. Trained professionals resolved cooling and noise problems efficiently using reliable parts.
Check-in Location
Paul Laurentiu
Technicians replaced a damaged damper assembly in a Kenmore side-by-side refrigerator in Austin, TX. This repair restored proper airflow and fixed uneven cooling. The service corrected temperature fluctuations by improving air distribution, ensuring consistent operation and food preservation. The team used compatible parts and focused on resolving airflow issues affecting temperature balance.
Check-in Location
Paul Laurentiu
Technicians replaced the main control board, defrost thermostat, and defrost heating element on a Whirlpool refrigerator in Lakeway, Texas. This repair resolved cooling problems, frost buildup, and system shutdowns, restoring proper defrost function and temperature control. The service improved refrigerator efficiency and protected the evaporator coil from damage.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty defrost heater and thermostat in a Whirlpool refrigerator in Austin, Texas. This repair restored airflow and stabilized internal temperature by preventing frost buildup. The service protected the evaporator coil and ensured consistent cooling performance.
Check-in Location
Paul Laurentiu
Technicians recharged R134A refrigerant in an LG refrigerator in Round Rock, TX. They diagnosed low refrigerant levels and restored proper cooling. The sealed-system service improved performance and reduced strain on the compressor. This repair helped prevent future cooling issues and supported efficient appliance operation.
Check-in Location
Paul Laurentiu
Technicians installed a hard start kit on a Maytag refrigerator in Austin, TX to fix compressor startup issues. This repair resolved clicking sounds and cooling problems while reducing electrical strain. The service improved compressor efficiency and helped prevent future failure, restoring reliable operation for the residential refrigerator.
Check-in Location
Paul Laurentiu
A technician replaced a worn door gasket on a side-by-side refrigerator in Austin, Texas. The service restored the seal, improved cooling efficiency, and reduced energy loss. The repair involved inspecting the seal, removing the old gasket, and installing a manufacturer-approved replacement to help extend the appliance’s lifespan and maintain stable food temperatures.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed a Sub-Zero refrigerator repair in Austin, Texas. A hard start kit was installed on the compressor to fix startup issues, increase energy efficiency, and prevent system strain. The technician accurately diagnosed the problem to restore consistent cooling and reliable operation.
Check-in Location
Paul Laurentiu
A technician added R-410A refrigerant to a Carrier air conditioner in Leander, Texas. The service included system inspection, pressure verification, and refrigerant recharge. This work restored cooling efficiency and reduced stress on the compressor caused by low refrigerant levels. The repair improved system performance and helped maintain energy efficiency.
Check-in Location
Paul Laurentiu
A Whirlpool front load washer drain pump was replaced in Austin, Texas. The repair fixed draining issues and restored normal spin cycles. The technician removed the faulty pump and installed a new unit to prevent water buildup and interrupted wash cycles. This service ensures reliable washer operation for homeowners in Austin.
Check-in Location
Paul Laurentiu
A technician replaced a faulty GE refrigerator ice maker assembly in Leander, Texas. The service corrected issues with ice production and inconsistent freezing. The new OEM-compatible ice maker improved water line safety and refrigerator performance. This refrigerator repair service focused on reliable diagnostics and proper installation for long-term appliance function.
Check-in Location
Paul Laurentiu
A technician in Austin, Texas replaced a defrost thermostat in a Samsung bottom freezer refrigerator. The service corrected ice buildup and airflow issues. The repair included testing and replacing the temperature sensor to restore proper cooling and system performance. This work helps prevent future frost problems and supports energy efficiency.
Check-in Location
Paul Laurentiu
Technicians replaced a Samsung dryer roller kit and repaired an oven infinite switch in Leander, Texas. The dryer had loud noises from worn rollers, while the oven had inconsistent heat from a faulty switch. The service restored smooth dryer operation and accurate oven temperature control in one visit.
Check-in Location
Paul Laurentiu
Technicians repaired a KitchenAid built-in wall refrigerator in Lakeway, Texas. They replaced the damper assembly and evaporator fan motor to fix airflow and temperature issues. The service restored cooling performance, improved efficiency, and ensured quiet operation. The repair was completed on the same day using high-quality parts.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a damaged LG washer door boot in Westlake, Austin, Texas. The team removed the old boot and installed a new factory-fitted seal to stop leaks and restore proper washer function. This service helps prevent water damage and odors caused by worn or moldy door gaskets.
Check-in Location
Paul Laurentiu
Technicians replaced a failed defrost system on a Kenmore refrigerator in Austin, Texas. The repair restored airflow and cooling by addressing excessive ice buildup. This service helps maintain proper temperature and efficiency in household refrigeration systems. Patriot Appliance and Air Conditioning Repair completed the work based out of Leander, Texas.
Check-in Location
Paul Laurentiu
Technicians replaced the main control board on a KitchenAid built-in wall refrigerator in Austin, Texas. The service resolved cooling issues and restored proper temperature control. Faulty control boards often cause inconsistent performance. The repair team installed a manufacturer-approved part to ensure reliable operation.
Check-in Location
Paul Laurentiu
Technicians replaced the main control board on a Sub-Zero refrigerator in Lakeway, Texas. The failed component caused cooling issues and system errors. The team installed a manufacturer-approved board to restore proper temperature control and system reliability. This service helps prevent cooling loss and ensures consistent refrigerator performance.
Check-in Location
Paul Laurentiu
Technicians replaced the main control board on a Sub-Zero refrigerator in Lakeway, Texas. The repair fixed cooling issues and communication errors caused by the failed board. The team installed a manufacturer-approved part to restore temperature stability and full system operation. This service was completed by a Leander-based appliance repair company.
Check-in Location
Paul Laurentiu
Technicians repaired a Samsung refrigerator in Round Rock, Texas, by replacing the defrost thermostat, heating element, and temperature sensor. These parts were necessary to fix cooling issues and prevent ice buildup. The service restored proper temperature control and improved efficiency, ensuring the appliance functioned correctly for the homeowner.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a failed heating element on a Samsung dryer in Austin, TX. The service fixed heat loss issues, restored efficient drying, and ensured safe electrical connections. Technicians diagnosed the problem accurately and completed the dryer repair to improve performance and reliability.
Check-in Location
Paul Laurentiu
Technicians installed a metal gas pipe for a gas furnace located in a closet AC unit in Austin, Texas. The team measured, threaded, and secured the pipe to meet safety standards and ensure correct gas pressure. This work supports safe furnace operation and reliable performance in residential HVAC systems.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty evaporator fan motor in a GE bottom freezer refrigerator in Leander, Texas. This repair restored proper airflow and consistent cooling. The service resolved issues including frost buildup, noise, and uneven temperatures, improving the unit's performance. The team used a reliable replacement motor to ensure lasting function.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty Samsung refrigerator evaporator fan motor in Austin, Texas. The repair restored proper airflow and cooling, resolving issues with noise, inconsistent temperatures, and frost buildup. This service improved energy efficiency and reduced strain on the cooling system for the homeowner.
Check-in Location
Paul Laurentiu
Technicians replaced a Northland freezer compressor in a built-in wall unit at a home in Austin, Texas. The service restored correct freezing levels and preserved the structure of the cabinetry. This project involved sealed-system work and focused on long-term freezer performance. The team specializes in high-end refrigerator and freezer repairs throughout the Austin area.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty LG refrigerator compressor in Cedar Park, Texas. The service restored proper cooling and extended the appliance’s lifespan. The team identified a sealed-system issue and installed a new OEM compressor. This repair helped the homeowner avoid a full refrigerator replacement while maintaining food preservation reliability.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a dual capacitor on a Trane air conditioning unit and added one pound of R-410A refrigerant. This service improved compressor operation, resolved startup issues, and restored cooling efficiency. The team identified low refrigerant levels and weak electrical components during diagnostics to ensure stable system performance.
Check-in Location
Paul Laurentiu
HVAC technicians in Austin, Texas replaced a condenser fan motor to restore proper airflow and cooling to an air conditioning system. The service included installing a 0.5 horsepower, 825 RPM motor to ensure reliable outdoor unit operation and prevent overheating during hot weather. This repair improved system performance and protected the compressor.
Check-in Location
Paul Laurentiu
Technicians replaced a dual capacitor and added one pound of R-22 refrigerant to a Trane AC unit in Round Rock, Texas. This repair improved system startup, reduced strain, and restored consistent cooling. The service addressed electrical and refrigerant issues to ensure safe and efficient AC operation during high heat conditions.
Check-in Location
Paul Laurentiu
Technicians added 3 pounds of R-22 refrigerant to a Goodman air conditioning system in Cedar Park, Texas. This AC repair restored cooling performance and reduced stress on the compressor. The service improved energy efficiency and extended the system’s function during extreme heat. Licensed HVAC professionals completed the refrigerant recharge after diagnosing low levels.
Check-in Location
Paul Laurentiu
Technicians added 2 pounds of R-22 refrigerant to an air conditioning system in Austin, Texas. This AC recharge corrected low refrigerant levels, improved cooling performance, and reduced compressor strain. The service restored consistent indoor temperature during summer conditions and helped maintain system efficiency for a residential customer in the 78732 area.
Check-in Location
Paul Laurentiu
Technicians added 2.5 pounds of R-410A refrigerant to a residential air conditioning system in Cedar Park, Texas. They diagnosed low refrigerant levels and recharged the unit to manufacturer standards. This service improved airflow, reduced indoor temperatures, and protected the compressor during high heat conditions.
Check-in Location
Paul Laurentiu
An HVAC technician in Austin, Texas completed an air conditioning repair by adding 1.5 pounds of R410A Freon and clearing a clogged drain line. The work restored cooling performance, prevented water damage, and improved system efficiency. This service addressed low refrigerant levels and drainage problems in a residential air conditioning system.
Check-in Location
Paul Laurentiu
An HVAC technician added 1.5 pounds of R410A refrigerant to a Carrier air conditioner in Austin, Texas. The service resolved weak cooling and long run times caused by low refrigerant. The technician checked system pressures, confirmed undercharging, and restored proper levels to improve system performance and efficiency in the Circle C neighborhood.
Check-in Location
Paul Laurentiu
An HVAC technician in Austin, Texas completed an R410A refrigerant recharge for a residential air conditioning system. The service included leak testing and adding one pound of refrigerant to restore proper cooling and reduce energy use. This helped improve system efficiency and protected the compressor from strain.
Check-in Location
Paul Laurentiu
An HVAC technician in Austin, Texas replaced a failed dual run capacitor affecting an air conditioner’s compressor and condenser fan motor. The repair restored cooling performance and improved system efficiency. This service helps prevent further damage and extends the life of the HVAC system for residential properties in the Austin area.
Check-in Location
Paul Laurentiu
A technician from Patriot Appliance and Air Conditioning Repair replaced a failed dual capacitor in an air conditioning unit in Austin, Texas. The service restored proper start-up and cooling performance by protecting the compressor and condenser fan motor. This repair helps prevent further AC damage and maintains system stability for residential properties.
Check-in Location
Paul Laurentiu
A technician in Austin, Texas replaced a failed dual run capacitor in a residential air conditioning system. The repair restored normal operation, protected the compressor and condenser fan motor, and improved system efficiency. This AC service supports longer equipment life and consistent cooling performance for the homeowner.
Check-in Location
Paul Laurentiu
A technician replaced a failed dual capacitor in an air conditioning system in Austin, Texas. The service restored proper operation of the compressor and fan motor. The team diagnosed weak performance and installed a new component to improve cooling. This HVAC repair helped prevent future issues and ensured stable system function.
Check-in Location
Paul Laurentiu
A technician inspected two Lennox air conditioning units in Cedar Park, Texas. The upstairs unit received a one-pound R410A refrigerant recharge. The downstairs unit showed no issues and needed no repair. This HVAC service improved system efficiency and maintained proper cooling performance in a residential home.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a failed condenser fan motor on a 15-year-old Carrier AC system in Austin, Texas. The repair restored proper airflow and cooling. The technician installed a Carrier-compatible motor to improve system efficiency and reduce energy use during hot weather. This service helped protect the compressor and extend system life.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed an R410A refrigerant recharge for a residential AC unit in Cedar Park, Texas. The technician added 3 pounds of refrigerant and applied a stop leak treatment. The system was tested for temperature, airflow, and performance to ensure proper cooling and reliability.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty ECM condenser fan motor on a Carrier AC unit in Austin, Texas. The new motor improved airflow and lowered energy use. This air conditioning repair helped restore system performance and efficiency for the homeowner. OEM-quality parts ensured reliable results for this residential HVAC service.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a failed air conditioner capacitor on a residential HVAC unit. The service restored proper cooling and eliminated hard starts and humming sounds. The team used compatible parts to complete the repair quickly and ensured the system operated efficiently after replacement.
Check-in Location
Paul Laurentiu
Technicians recharged two HVAC systems in Austin, TX. One unit received 1 pound of R-410A refrigerant; the other was charged with 2 pounds of R-407C. The service included condenser inspections, refrigerant line checks, and pressure testing to restore proper cooling and system efficiency.
Check-in Location
Paul Laurentiu
A licensed technician completed an R-410A refrigerant recharge and applied a stop leak treatment for a residential air conditioning system in Austin, Texas. The service included an AC diagnostic, refrigerant pressure check, and performance testing to restore cooling efficiency and address a minor system leak.
Check-in Location
Paul Laurentiu
An HVAC technician completed a 4.5-pound R-22 Freon recharge for a residential air conditioning system in Cedar Park, Texas. The service included a full diagnostic, condenser inspection, leak check, and verification of superheat and subcooling levels to restore cooling performance and support system efficiency during high temperatures.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed a 555 MFD dual capacitor replacement for an air conditioning unit in Austin, Texas. A technician diagnosed a weak capacitor that affected startup performance. Replacing the component restored efficient operation and ensured stable voltage to the fan motor and compressor. This repair improved system reliability and function.
Check-in Location
Paul Laurentiu
An HVAC technician in Leander, Texas replaced a faulty 555 dual run capacitor in a residential air conditioning unit. The repair corrected startup issues and irregular cooling. This service included system diagnostics to ensure reliable and safe performance during warm weather. The technician used a durable, high-performance capacitor to support efficient AC function.
Check-in Location
Paul Laurentiu
An HVAC technician from Patriot Appliance and Air Conditioning Repair replaced a faulty 707.5 dual run capacitor in an air conditioning system in Cedar Park, Texas. The service restored motor and compressor performance. The technician also identified the need for a 50-amp breaker upgrade to support safe electrical load at the outdoor unit.
Check-in Location
Paul Laurentiu
Technicians replaced a 14 HP 825 RPM condenser fan motor for an air conditioning unit in Austin, Texas. The service restored cooling system performance by resolving issues like overheating and non-spinning motors. This motor replacement helps maintain efficient operation for both residential and commercial HVAC systems in the Austin area.
Check-in Location
Paul Laurentiu
Technicians replaced a failed dual capacitor in a residential HVAC system in Leander, Texas. The repair restored proper air conditioner function and improved energy efficiency. This service involved diagnosing and replacing the faulty component to ensure stable cooling performance in the home.
Check-in Location
Paul Laurentiu
Technicians added 2 pounds of Freon to a Lennox air conditioner in Leander, Texas. They diagnosed low refrigerant levels, refilled the system to manufacturer standards, and checked for leaks and electrical issues. This service restored proper cooling and protected the compressor from damage. The team followed EPA guidelines for refrigerant handling.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed a 1.5-pound R22 Freon recharge for a central air unit in Cedar Park, Texas. Technicians restored refrigerant levels to correct pressure, improving cooling efficiency and protecting the compressor. The service supports older HVAC systems and complies with EPA refrigerant handling standards.
Check-in Location
Paul Laurentiu
Technicians installed a new Carrier evaporator coil in an attic for a homeowner in Cedar Park, Texas. The team welded, vacuumed, and sealed the system, then added six pounds of refrigerant. This restored proper airflow and cooling performance while supporting energy efficiency. The service ensures compliance with safety and refrigerant standards.
Check-in Location
Paul Laurentiu
Technicians completed a dual capacitor replacement and Freon recharge in Round Rock, Texas. The team replaced faulty AC capacitors and added two pounds of refrigerant to restore cooling performance. These services help maintain air conditioner efficiency and reduce downtime during warm weather. Nearby cities served include Leander, Cedar Park, and Georgetown.
Check-in Location
Paul Laurentiu
Technicians charged 3 pounds of R410A refrigerant for a residential air conditioning system in Georgetown, Texas. They inspected for leaks and verified proper pressure, superheat, and subcooling levels. This service restored cooling efficiency and ensured safe system operation during hot weather. The team operates from Leander, Texas, and serves homes across Williamson County.
Check-in Location
Paul Laurentiu
HVAC technicians in Cedar Park, Texas performed an R22 refrigerant recharge with a one-pound top-off for an older air conditioning system. They checked system pressure, superheat, and subcool values, inspected for leaks, and followed EPA rules for safe refrigerant handling. This service helps improve cooling without full AC replacement.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a failed dual run capacitor in a Trane air conditioner in Cedar Park, Texas. The service restored cooling performance by ensuring proper function of the compressor and condenser fan motor. Timely capacitor replacement helps prevent system damage and improves overall AC reliability.
Check-in Location
Paul Laurentiu
HVAC technicians replaced a faulty dual run capacitor in a Lennox air conditioning unit in Austin, Texas. The capacitor supports both the compressor and condenser fan motor. Timely replacement restored proper cooling and prevented further system damage. This service helps maintain reliable AC performance and extends equipment life.
Check-in Location
Paul Laurentiu
Technicians replaced a failed blower motor capacitor on a Carrier air conditioner in Cedar Park, Texas. The service restored normal airflow and stopped the AC unit from malfunctioning. This repair helps prevent blower motor damage and extends the system's life. The team used manufacturer-approved parts to ensure proper performance and compatibility.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty AC condenser fan motor for a residential customer in Pflugerville, TX. The repair fixed issues with motor noise and overheating. The service used brand-approved parts to ensure long-term performance. This repair helps maintain proper cooling efficiency during high temperatures common in Central Texas.
Check-in Location
Paul Laurentiu
A technician in Austin, Texas replaced a failed dual run capacitor and added 1.5 pounds of R-410A refrigerant to a home air-conditioning system. The repair restored proper cooling, improved energy efficiency, and ensured smooth operation of both the compressor and condenser fan motor in high summer temperatures.
Check-in Location
Paul Laurentiu
A technician added 3 pounds of R-410A Freon to a Lennox AC unit in Leander, Texas. This service corrected a low-refrigerant issue, improved cooling, stabilized system pressure, and helped prevent evaporator coil freeze-ups. The technician also checked airflow, line conditions, and temperature split to confirm proper AC operation after the recharge.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a worn AC contactor and added one pound of R-410A refrigerant to a residential air conditioning unit. This HVAC service restored proper electrical function and improved cooling efficiency. The technician also inspected electrical components, checked system pressures, and confirmed correct temperature split for reliable operation.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a failed dual run capacitor on a Goodman air conditioner and added one pound of R-410A refrigerant. This repair fixed low refrigerant levels, improved cooling performance, and stabilized the system by restoring proper operation of the condenser fan motor and compressor.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair recharged an air conditioner with 3 pounds of R-410A Freon and added leak sealer in Jonestown, Texas. The technician restored cooling, checked system pressures, inspected refrigerant lines, and improved performance, helping reduce the risk of compressor damage and short-cycling in high summer temperatures.
Check-in Location
Paul Laurentiu
Technicians replaced a failed 705 dual run capacitor and added 1 pound of R-410A refrigerant to a residential AC unit in Leander, Texas. This service restored proper startup for the condenser fan and compressor, improved cooling performance, and prevented breaker trips caused by a low charge and malfunctioning components.
Check-in Location
Paul Laurentiu
A technician added 2 pounds of R-410A refrigerant to a home air conditioner in Pflugerville, Texas. This AC recharge improved cooling, protected the compressor, and reduced short-cycling. The service included checking pressure, airflow, and temperature to verify system performance. The contractor also identifies refrigerant leaks and advises on long-term AC repair options.
Check-in Location
Paul Laurentiu
A technician added 1.5 pounds of R-22 Freon and a stop-leak product to a 20-year-old Trane air conditioner in Austin, Texas. The service stabilized pressures, improved air temperature, and reduced leakage. This repair extended the unit’s life and helped homeowners avoid immediate replacement while improving cooling in the Central Texas climate.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a failed run capacitor on an R-22 air conditioner in Austin, Texas. The service restored proper start-up of the compressor and fan motor, improving cooling efficiency. The technician also inspected refrigerant lines, contactors, and motor performance to confirm system reliability after the repair.
Check-in Location
Paul Laurentiu
A technician charged a Lennox air-conditioning unit with 3.5 pounds of R-410A Freon in Leander, Texas. This AC service improved cooling performance, stabilized system pressure, and helped prevent freeze-ups and short cycling. The refrigerant recharge ensured consistent air distribution and supported energy-efficient operation during high summer temperatures.
Check-in Location
Paul Laurentiu
Technicians added 1.5 pounds of R-410A refrigerant to a Goodman air conditioning unit in Leander, Texas. They tested system pressure, verified temperature drop, and improved cooling performance. This service helps homeowners in Leander reduce energy use and restore proper AC function using manufacturer-recommended methods and digital tools.
Check-in Location
Paul Laurentiu
Technicians installed a dual capacitor and added 1 pound of R-410A refrigerant to a Carrier air conditioning unit in Leander, Texas. This service restored full cooling performance by addressing capacitor failure and low refrigerant levels. The team verified wiring and performed system testing to ensure proper operation and immediate cooling restoration.
Check-in Location
Paul Laurentiu
Technicians added 1.5 pounds of R-22 Freon to a residential air conditioning system in Cedar Park, Texas. The service included refrigerant evacuation, leak testing, and performance checks. This R-22 recharge restored proper cooling to an older AC unit, ensuring it met manufacturer standards. The work was completed by HVAC professionals based in Leander, Texas.
Check-in Location
Paul Laurentiu
Technicians recharged a Lennox AC unit with 2.5 pounds of R-410A refrigerant in Leander, Texas. They used digital equipment to remove old refrigerant, tested system pressure, and confirmed temperature drop. This service restored consistent cooling and improved performance in the home. The job included refrigerant removal, measured refill, and system performance checks.
Check-in Location
Paul Laurentiu
Technicians recharged a residential air conditioning unit with 5.5 pounds of R-410A refrigerant in Leander, Texas. They also applied an AC stop leak treatment to address minor leaks. The service included system evacuation, leak detection, and performance testing to improve cooling and prevent future breakdowns.
Check-in Location
Paul Laurentiu
Technicians installed a 3.5-ton, 16 SEER Amana air conditioning system in Leander, Texas. The team removed the old unit, installed the new system, charged the refrigerant, and completed the startup process. This high-efficiency system helps reduce energy costs and includes factory-backed warranties for long-term reliability in the Texas climate.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair installed a new 3.5-ton Goodman 15 SEER air conditioner in Austin, Texas. Technicians completed the full installation, including a copper line set, thermostat setup, and refrigerant charge. This service ensures energy-efficient cooling and consistent performance for residential homes in the Austin area.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty Carrier AC dual run capacitor for a residential cooling system in Leander, Texas. The service resolved issues with a noisy condenser fan and poor cooling. The team completed a full system inspection and installed new components to restore reliable air conditioning function.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a failed dual run capacitor in a Carrier air conditioner. The faulty capacitor had stopped the compressor and fan motor. Replacing it restored cooling and improved system efficiency. This service addressed electrical issues and prevented further strain on the unit.
Check-in Location
Paul Laurentiu
A technician in Leander, Texas replaced a faulty dual run capacitor on a Carrier air conditioner. The unit had failed to start due to low microfarad readings. After installing a new capacitor, the compressor and fan motor resumed normal operation, restoring airflow and cooling performance. This service improved system efficiency during local summer conditions.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a dual run capacitor in a Carrier AC unit in Cedar Park, Texas. Technicians removed the faulty capacitor, installed the new one with correct wiring, and tested the system for proper fan and compressor function. This service helps improve cooling efficiency and supports long-term AC performance.
Check-in Location
Paul Laurentiu
HVAC technicians added 3 pounds of R-410A Freon and applied a stop leak treatment to a residential air conditioning unit in Lakeway, Texas. They completed system evacuation, pressure testing, and leak detection to restore proper cooling. This service reduced leaks, improved refrigerant levels, and increased system efficiency for better performance during hot weather.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a faulty dual capacitor and added 1 pound of R-410A refrigerant to an AC unit in Austin, Texas. The technicians performed leak detection, connected the new capacitor with proper wiring, and verified refrigerant levels to restore efficient cooling and reliable system operation.
Check-in Location
Paul Laurentiu
Technicians added 1.5 pounds of R-410A refrigerant to a Lennox air conditioning unit in Cedar Park, Texas. They checked for leaks and verified proper superheat and subcooling levels. This Freon recharge improved cooling performance, increased energy efficiency, and helped maintain system reliability during high summer temperatures in the 78613 area.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a ¼ HP 208-230V 1100 RPM condenser fan motor on an R-22 AC system. The team disconnected power, removed the failed motor, installed the new unit, checked blade balance and capacitors, and tested airflow. This service restores cooling performance and improves efficiency for residential air conditioners.
Check-in Location
Paul Laurentiu
HVAC technicians in Leander, Texas replaced a faulty dual run capacitor on a Carrier AC unit. The service included removing the old capacitor, installing a compatible replacement, and testing the system. This repair restored proper fan and compressor function, improved cooling efficiency, and reduced the risk of motor failure.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a dual run capacitor and added 2 pounds of R-410A refrigerant to a Lennox AC unit. They performed leak testing, wiring checks, and pressure verification to restore cooling performance and extend system life. This AC repair service helps maintain proper fan and compressor function during high summer temperatures.
Check-in Location
Paul Laurentiu
Technicians replaced a failed condenser fan motor and capacitor on a residential AC unit in Cedar Park, Texas. The repair restored proper airflow and ensured reliable motor startup. The team completed safety wiring and full system testing to confirm efficient operation. This service improves cooling performance for homeowners during high summer temperatures.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a defective dual run capacitor in a Lennox air conditioner and recharged the system with 2.5 pounds of R-22 refrigerant. They performed leak checks before the recharge and tested the unit after repairs. This service restored proper cooling and improved efficiency for the residential HVAC system.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty dual run capacitor on a Carrier air conditioning unit in Cedar Park, Texas. The service restored fan and compressor function, helping prevent overheating and improve system efficiency. The process included safely discharging the old capacitor, installing the new part, and verifying proper operation through system testing.
Check-in Location
Paul Laurentiu
Technicians in Austin, Texas replaced a dual run capacitor and added 1.5 pounds of R-410A refrigerant to restore an air conditioning unit. This service resolved power issues and low cooling performance caused by capacitor failure and low refrigerant levels. The team completed the repair efficiently to improve system reliability and cooling output.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas, added 5.5 pounds of R-410A Freon and applied stop leak to a Lennox AC unit. They vacuumed the system before recharging to prevent contamination. This service restored the unit’s cooling performance by sealing minor leaks and improving refrigerant levels. The work supports reliable cooling efficiency in high-demand conditions.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas replaced a Lennox AC unit's evaporator coil and added 6 pounds of R-410A Freon after vacuuming the system. This service restored cooling performance by removing leaks and improving refrigerant flow. The process ensured clean, efficient operation for better reliability during hot weather.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas added 0.5 pounds of R-410A Freon and replaced the dual capacitor on a Carrier AC unit. This service restored cooling and electrical function by addressing both low refrigerant and capacitor failure. The procedure followed EPA regulations and ensured accurate refrigerant levels for efficient Carrier AC system operation.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas added 2.5 pounds of R-410A refrigerant to a single Carrier air conditioning unit that was low on Freon. The service included a full system check and leak detection to restore efficient cooling performance during the summer. This focused recharge helped the unit operate at normal capacity without overfilling.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas recharged an air conditioning system with 2.5 pounds of R-410A Freon. They inspected the unit for leaks and checked system performance to ensure safe and efficient cooling. This Freon recharge service improves AC operation and supports proper temperature control during warm weather.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty condenser fan motor in Round Rock, Texas. This service restored air conditioning efficiency and protected the system from compressor and coil damage. The team from Leander used OEM parts for reliable performance. Same-day repair helped maintain cooling during hot weather conditions in the greater Austin area.
Check-in Location
Paul Laurentiu
Technicians recharged a Lennox AC unit with 2 pounds of R-410A Freon in Leander, Texas. They checked for refrigerant leaks before service and followed EPA safety guidelines. This Freon recharge helped restore proper cooling performance. The team completed the job quickly for reliable operation during high summer temperatures in the 78641 area.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed a Freon recharge using 2.5 pounds of R-410A and performed a dual capacitor replacement in Leander, Texas. These services help restore air conditioning function by addressing low refrigerant and failing capacitors. Technicians also conducted a leak check to ensure system safety and performance.
Check-in Location
Paul Laurentiu
Technicians replaced a faulty condenser fan motor in Westlake, TX. The service included diagnosing the issue, installing a new motor, and checking refrigerant levels. This repair restored proper cooling and helped prevent compressor damage. The team handled the job efficiently and used compatible parts for the air conditioning system.
Check-in Location
Paul Laurentiu
A technician replaced a faulty condenser fan motor dual capacitor in an AC unit in Austin, Texas 78748. The service restored proper voltage flow between the fan motor and compressor. The technician installed a correctly rated capacitor, checked wiring, and verified fan motor function to resolve startup issues and prevent further component damage.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed an emergency suction line repair in Leander, Texas. Technicians welded a punctured refrigerant line, purged the system with nitrogen, vacuumed to 500 microns, and recharged with 8 pounds of 410A. The team tested for leaks, checked system components, and confirmed proper AC performance after roofing-related damage.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a failed condenser fan motor on a Carrier AC unit in Leander, Texas. The technician installed a new motor matched to Carrier specifications and verified system performance, restoring airflow and protecting the compressor from overheating during hot weather. This service supports efficient cooling and system longevity.
Check-in Location
Paul Laurentiu
Technicians replaced a 4-ton Lennox evaporator coil using 410A refrigerant in Leander, Texas. The service included refrigerant recovery, coil installation, drain connection setup, system recharging, blower inspection, drain line cleaning, and airflow verification. This work restored cooling efficiency and resolved issues such as leaks, freezing, and poor airflow in the central AC system.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a 15 hp, 208–230 V, 825 RPM condenser fan motor on a 410A air conditioning system in Austin, Texas. The technician ensured proper airflow, removed the failed motor, installed a new unit, checked the fan blade, and verified refrigerant pressure and temperature for safe and efficient operation.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a 14 horsepower, 825 RPM, 208/230-volt condenser fan motor on a Carrier R410A air conditioner in Leander, Texas. The technician removed the faulty motor, installed the correct replacement, checked the fan blade, and verified system pressures to maintain efficient cooling during Texas summers.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a condenser fan motor on an R22 air conditioning system in Austin, Texas. The repair restored airflow, reduced high head pressure, and improved cooling. The technician installed the new motor, verified correct wiring and rotation, and ensured proper operation for continued AC performance in the 78735 area.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair added 4 pounds of R22 Freon and a stop leak treatment to a 3-ton American Standard air conditioner in Leander, Texas. The service improved system pressures and cooling efficiency. The technician also inspected refrigerant lines and the evaporator coil to support stable operation during high temperatures.
Check-in Location
Paul Laurentiu
A technician replaced a 14 HP 825 RPM condenser fan motor on a Goodman AC unit in Leander, Texas. The service improved airflow, reduced compressor strain, and restored cooling performance. The technician also checked the run capacitor, inspected the fan blade, and reviewed the condenser's condition to ensure reliable operation.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair replaced a 14 hp, 825 RPM condenser fan motor on a Carrier AC unit in Pflugerville, Texas. The service included motor installation, capacitor inspection, and fan blade balancing to improve airflow, reduce strain on the compressor, and restore cooling performance during high temperatures.
Check-in Location
Paul Laurentiu
Technicians replaced a failed condenser fan motor and a weak capacitor in an air conditioning unit in Leander, Texas. The team restored cooling performance and airflow by installing new OEM parts. They completed diagnostic checks and ensured balance in system operation for long-term function. This service covered both residential and commercial AC systems.
Check-in Location
Paul Laurentiu
Technicians in Leander, Texas completed a condenser fan motor and capacitor replacement for a residential air conditioning system. They diagnosed airflow and startup issues, replaced worn components with OEM parts, and restored cooling performance. This service improves system efficiency and prevents compressor damage in HVAC units across Central Texas, including Cedar Park, Liberty Hill, and Georgetown.
Check-in Location
Paul Laurentiu
Technicians recharged a Lennox air conditioning system with 8 pounds of refrigerant and applied a stop leak additive in Austin, Texas. The service included a full pressure test, leak inspection, and system performance check to ensure efficient cooling and prevent future issues in South Austin neighborhoods like Zilker, Travis Heights, and Barton Hills.
Check-in Location
Paul Laurentiu
Patriot Appliance and Air Conditioning Repair completed an air conditioner Freon recharge in Leander, Texas. Technicians refilled R-410A and R-22 refrigerant, performed leak testing, pressure checks, and inspected system performance. The service supported multiple AC brands including Goodman, Carrier, and Trane, helping improve cooling efficiency for residential and commercial systems.
Check-in Location
Paul Laurentiu
Technicians replaced a five-ton Carrier compressor and installed a new filter dryer on a residential HVAC system in Leander, Texas. The service included a system pressure test, vacuum, refrigerant recharge, and full performance check. All parts met Carrier specifications to restore proper cooling and efficiency across the entire system.
Check-in Location
Check-ins - Reviews - Content - Ranking